Efeito do tempo de ensaio e da concentração de lama abrasiva sob o comportamento ao desgaste microabrasivo de uma liga de aço contendo aluminetos de ferro
Keywords:
Desgaste Microabrasivo, Intermetálicos, Aluminetos de ferroAbstract
O propósito deste trabalho é pesquisar a influência do tempo de ensaio (t) e da concentração de lama abrasiva (C) sob o comportamento ao desgaste microabrasivo de uma liga de aço contendo aluminetos de ferro. Ensaios “ball-cratering” foram conduzidos sob a liga fabricada Fe-30Al-6Cr (at.%), junto a uma esfera de aço AISI 52100 e lamas abrasivas preparadas com óxido de alumínio (Al2O3) + água. Diferentes condições de ensaio foram estabelecidas e os resultados mostraram que o tempo de ensaio e a concentração da lama abrasiva influenciaram as atuações dos modos de desgaste microabrasivo e o volume de desgaste (V), sendo V proporcional à t e C (V (t,C)).
Downloads
References
ADACHI, K.; HUTCHINGS, I.M.. Wear-mode mapping for the micro-scale abrasion test. Wear, vol. 255, p. 23-29, 2003.
ADACHI, K.; HUTCHINGS, I.M.. Sensitivity of wear rates in the micro-scale abrasion test to test conditions and material hardness. Wear, vol. 258, p. 318-321, 2005.
ALLSOPP, D.N.; TREZONA, R.I.; HUTCHINGS, I.M.. The effects of ball surface condition in the micro-scale abrasive wear test. Tribology Letters, vol. 5, p. 259-264, 1998.
BORGES, D.F.L.. Processamento e caracterização de aluminetos de ferro obtidos a partir de matéria-prima reciclada. Dissertação de Mestrado, Universidade de São Paulo, São Paulo – SP, Brasil, 2010, 80 p.. Disponível on-line: http://www.teses.usp.br/.
BYSTRZYCKI, J.; FRACZKIEWICZ, A.; ŁYSZKOWSKI, R.; MONDON, M.
PAKIELA, Z.. Microstructure and tensile behavior of Fe-16Al-based alloy after severe plastic deformation. Intermetallics, vol. 18, p. 1338-1343, 2010.
COZZA, R.C.. Estudo do comportamento do coeficiente de desgaste e dos modos de desgaste abrasivo em ensaios de desgaste micro-abrasivo. Dissertação de Mestrado, Universidade de São Paulo, São Paulo – SP, Brasil, 2006, 217 p.. Disponível on-line: http://www.teses.usp.br/.
COZZA, R.C.. Estudo do desgaste e atrito em ensaios micro-abrasivos por esfera rotativa fixa em condições de força normal constante e pressão constante. Tese de Doutorado, Universidade de São Paulo, São Paulo – SP, Brasil, 2011, 327 p.. Disponível on-line: http://www.teses.usp.br/.
COZZA, R.C.. Effect of pressure on abrasive wear mode transitions in micro-abrasive wear tests of WC-Co P20. Tribology International, vol. 57, p. 266-271, 2013.
COZZA, R.C.. Third abrasive wear mode: is it possible? Journal of Materials Research and Technology, vol. 3 (2), p. 191-193, 2014.
COZZA, R.C.. Effect of sliding distance on abrasive wear modes transition. Journal of Materials Research and Technology, 2015. Accepted for publication. DOI information: 10.1016/j.jmrt.2014.10.007.
COZZA, R.C.; DE MELLO, J.D.B.; TANAKA, D.K.; SOUZA, R.M.. Relationship between test severity and wear mode transition in micro-abrasive wear tests. Wear, vol. 263, p. 111-116, 2007.
COZZA, R.C.; TANAKA, D.K.; SOUZA, R.M.. Friction coefficient and abrasive wear modes in ball-cratering tests conducted at constant normal force and constant pressure – preliminary results. Wear, vol. 267, p. 61-70, 2009.
COZZA, R.C.; TANAKA, D.K.; SOUZA, R.M.. Friction coefficient and wear mode transition in micro-scale abrasion tests. Tribology International, vol. 44, 1878-1889, 2011.
DEEVI, S.C.; SIKKA, V.K.. Nickel and iron aluminides: an overview on properties, processing, and applications. Intermetallics, vol. 4, p. 357-375, 1996.
DOBEŠ, F.; MILIČKA, K.. Estimation of ductility of Fe-Al alloys by means of small punch test. Intermetallics, vol. 18, p. 1357-1359, 2010.
DOGAN, C.P.; HAWK, J.A.. Microstructure and abrasive wear in silicon nitride ceramics. Wear, vol. 250, p. 256-263, 2001.
GEE, M.G.; GANT, A.J.; HUTCHINGS, I.M.; BETHKE, R.; SCHIFFMAN, K.;
VAN ACKER, K.; POULAT, S.; GACHON, Y.; VON STEBUT, J.. Progress towards standardisation of ball cratering. Wear, vol. 255, p. 1-13, 2003.
HANUS, P.; BARTSCH, E.; PALM, M.; KREIN, R.; BAUER-PARTENHEIMER, K.; JANSCHEK, P.. Mechanical properties of a forged Fe-25Al-2Ta steam turbine blade. Intermetallics, vol. 18, p. 1379-1384, 2010.
HUTCHINGS, I.M.. Tribology – Friction and Wear of Engineering Materials. 7th Edition, Edward Arnold, a division of Hodder Headline PLC, London, UK, 1992.
KELLY, D.A.; HUTCHINGS, I.M.. A new method for measurement of particle abrasivity. Wear, vol. 250, p. 76-80, 2001.
KREIN, R.; SCHNEIDER, A.; SAUTHOFF, G.; FROMMEYER, G.. Microstructure and mechanical properties of Fe3Al-based alloys with strengthening boride precipitates. Intermetallics, vol. 15, p. 1172-1182, 2007.
MERGLER, Y.J.; HUIS IN ‘T VELD, A.J.. Micro-abrasive wear of semi-crystalline polymers. Tribology and Interface Engineering Series 41, p. 165-173, 2003. Tribological Research and Design for Engineering Systems – Proceedings of the 29th Leeds-Lyon Symposium on Tribology, Bodington Hall, University of Leeds, UK.
MORRIS, D.G.. Possibilities for high-temperature strengthening in iron aluminides. Intermetallics, vol. 6, p. 753-758, 1998.
MORRIS, D.G.; MORRIS-MUÑOZ, M.A.. The influence of microstructure on the ductility of iron aluminides. Intermetallics, vol. 7, p. 1121-1129, 1999.
RISANTI, D.D.; SAUTHOFF, G.. Microstructures and mechanical properties of Fe-Al-Ta alloys with strengthening Laves phase. Intermetallics, vol. 19, p. 1727-1736, 2011.
RUTHERFORD, K.L.; HUTCHINGS, I.M.. Theory and application of a micro-scale abrasive wear test. Journal of Testing and Evaluation – JTEVA, vol. 25 (2), p. 250-260, 1997.
SCHIFFMANN, K.I.; BETHKE, R.; KRISTEN, N.. Analysis of perforating and non-perforating micro-scale abrasion tests on coated substrates. Surface and Coatings Technology, vol. 200, p. 2348-2357, 2005.
SCHNEIBEL, J.H.; GEORGE, E.P.; ANDERSON, I.M.. Tensile ductility, slow crack growth, and fracture mode of ternary B2 iron aluminides at room temperature. Intermetallics, vol. 5, p. 185-193, 1997.
STEIN, F.; SCHNEIDER, A.; FROMMEYER, G.. Flow stress anomaly and order-disorder transitions in Fe3Al-based Fe-Al-Ti-X alloys with X = V, Cr, Nb, or Mo. Intermetallics,
vol. 11, p. 71-82, 2003.
TREZONA, R.I.; ALLSOPP, D.N.; HUTCHINGS, I.M.. Transitions between two-body and three-body abrasive wear: influence of test conditions in the microscale abrasive wear test. Wear, vol. 225-229, p. 205-214, 1999.
TREZONA, R.I.; HUTCHINGS, I.M.. Three-body abrasive wear testing of soft materials. Wear, vol. 233-235, p. 209-221, 1999.
WU, D.; BAKER, I.; MUNROE, P.R.; GEORGE, E.P.. The yield strength anomaly of single-slip-oriented Fe-Al single crystals. Intermetallics, vol. 15, p. 103-107, 2007.
Published
How to Cite
Issue
Section
Copyright (c) 2016 Revista Processando o Saber
This work is licensed under a Creative Commons Attribution 4.0 International License.
Os direitos autorais dos artigos publicados pertencem à Revista Processando o Saber e seguem o padrão Creative Commons (CC BY), que permite o remixe, adaptação e criação de obras derivadas do original, mesmo para fins comerciais. As novas obras devem conter menção ao(s) autor(es) nos créditos.